* 
Leader in the field of safety tester and cable tester ...
Contact Sefelec
Leader in the field of safety tester and cable tester Leader in the field of safety tester and cable tester Leader in the field of safety tester and cable tester Leader in the field of safety tester and cable tester Technical articles : electrical safety testing Leader in the field of safety tester and cable tester Leader in the field of safety tester and cable tester
  PRODUCTS
   SAFETY TESTER
   HIPOT TESTER
   DIELECTRIMETER
   MEGOHMMETER
   MICROHMMETER &    MILLIOHMMETER
   CABLE TESTER
   ACCESSORIES &    STANDARD RESISTORS
   OTHER
  REQUEST FOR QUOTATION

ACCESSORIES and STANDARD RESISTORS CO192

Référence : CO192

Descriptif du produit : This accessory is dedicated to RMG500, RXS500, RXS506 (for hipot testing, also called flash testing, dielectric strength testing, high voltage testing), to DMG500, DXS500, DXS506 dielectrimeter (hi-pot test + insulation test) and to SMG500, SXS500, SXS506 safety tester (ground bond test + hi-pot test + insulation test), for high voltage measurement and/or insulation measurement

Détail :
► Length : 1.80 meter
► Starting : high voltage connector (that goes to the Sefelec unit)
► Ending : external box equipped with 6 female socket (shücko, english, french, italian, swiss, US 3 poles), where the sample is connected, and one 2 wire input connected to the shücko female socket ground point, when the test of ground continuity is also made (only connected with SMG500, SXS500 and SXS506 electrical safety tester)
► Type : connection box for high voltage measurement and/or insulation measurement and/or ground bond test
► Most common application : especially made to connect device under test having a mains socket



  SEFELEC | 19, rue des Campanules | 77185 LOGNES | EXPORT +33 (0)1 64 11 83 42 | FAX +33 (0)1 60 17 35 01 | Contact us