My cart
No products in your shopping cart
AN ELECTRICAL SAFETY TESTER PERFORMS THE ELECTRICAL TESTS REQUIRED BY THE MAIN STANDARDS CONCERNED BY THE LOW VOLTAGE DIRECTIVE (LVD) AND IN COMPLIANCE WITH THE VARIOUS REGULATIONS: EN, NF, UL, IEC, CSA, VDE .. .
These testers can make 3 different tests in 1 device. A combination of those tests can be programmed:
►Ground bond test (also called bonding test, ground continuity test)
►Hipot test (dielectric strength, breakdown or flash test)
►Isulation test (insulation resistance measurement)
These 3 tests are required by standards during development and/or in production for the major part of electrical products
(standards IEC or EN 60335, 60950, 60601, 61010, 60598, 60990, 60204...)
Some standards require the earth leakage current measurement in addition to the tests above.
- insulation test (also called high resistance test, megger test)
- hipot test to make a high voltage test (also called dielectric strength test, hipot test, hi-pot test, breakdown test or flash test)
- leakage current measurement (also called line leakage test)
The final purpose of those tests is to validate that the product under test is safe for the end user, and complies with the quality requirements from the Low Voltage Directive (LVD), applicable to the corresponding standards (IEC335, IEC950, IEC601, IEC1010, IEC598, IEC990, IEC204...)
LVD testers selection guide
APPLICATION
FOR MANUTACTURERS, LABORATORIES, PRODUCTION LINES, SERVICES AND MAINTENANCE IN ORDER TO COMPLY WITH THE LOW VOLTAGE DIRECTIVE (LVD)
• IEC 335 household manufacturer (washing machines, coffee machines, fridges, heaters, boilers, …)
• IEC 204 industrial equipment (compressor, electrical tools, …)
• IEC 598 lighting industry (street lights, professional lighting, medical lighting, bulbs, …)
• IEC 601 medical industry (scanners, surgery equipments, X-ray, electrical beds, …)
• IEC 950 information technology industry (modems, satellite receivers, servers, printers,
cash dispensers, …)
• IEC 1010 measurement, control and laboratories industry (electrical meters, test & measurement equipment, …)
• IEC / EN 60335 household appliances (washing machines, coffee machines, fridges, heaters, boilers, …)
• IEC / EN 60204 industrial equipment (compressor, electrical tools, …)
• IEC / EN 60598 lighting industry (street lights, professional lighting, medical lighting, bulbs, …)
• IEC / EN 60601 medical industry (scanners, surgery equipments, X-ray, electrical beds, …)
• IEC / EN 60950 information technology industry (modems, satellite receivers, servers, printers,
• IEC / EN 60204 industrial equipment (compressor, electrical tools, …)
• IEC / EN 60598 lighting industry (street lights, professional lighting, medical lighting, bulbs, …)
• IEC / EN 60601 medical industry (scanners, surgery equipments, X-ray, electrical beds, …)
• IEC / EN 60950 information technology industry (modems, satellite receivers, servers, printers,
cash dispensers, …)
• IEC / EN 61010 measurement, control and laboratories industry (electrical meters, test & measurement equipment, …)
• IEC / EN 61010 measurement, control and laboratories industry (electrical meters, test & measurement equipment, …)
CARACTERISTIQUES TECHNIQUES DU LABORATOIRE AU TEST EN PRODUCTION, NOTRE GAMME COUVRE LES CARACTÉRISTIQUES SUIVANTES :
• ground bond test up to 40A AC with resistance measurement up to 1,5Ω
• insulation test with DC Voltage from 1V up to 1000 VDC (1V steps)
• hipot test with our ”delta I” exclusive detection type for non destructive testing, up to 5 kVAC,
6 kVDC
• possible destructive hipot test (for investigation and laboratory use) but also hipot test at operating temperature
• leakage current measurement in single or three phases, according to all current international standards
• power measurement and cos φ measurement
• GPIB, RS232, Ethernet, 0-10V, PLC available
• WINPASS-MX software for quality purposes, traceability and professional reporting
• Ground bond test up to 40A AC with resistance measurement up to 1,5Ω
• Insulation test with DC Voltage from 1V up to 1000 VDC (1V steps)
• Hipot test with our ”delta I” exclusive detection type for non destructive testing, up to 5 kVAC, 6 kVDC
• Destructive hipot test (for investigation and laboratory use) but also hipot test at operating temperatur
• Leakage current measurement in single or three phases, according to all current international standard
• Power measurement and cos φ measurement
• GPIB, RS232, Ethernet, 0-10V, PLC available
• WINPASS-MX software for quality purposes, traceability and professional reporting
• Insulation test with DC Voltage from 1V up to 1000 VDC (1V steps)
• Hipot test with our ”delta I” exclusive detection type for non destructive testing, up to 5 kVAC, 6 kVDC
• Destructive hipot test (for investigation and laboratory use) but also hipot test at operating temperatur
• Leakage current measurement in single or three phases, according to all current international standard
• Power measurement and cos φ measurement
• GPIB, RS232, Ethernet, 0-10V, PLC available
• WINPASS-MX software for quality purposes, traceability and professional reporting