| |
Click on the below family to reach the desired Cable Testing or Safety Testing section :
- Probes, clips, cables, boxes, extensions, ...
- GROUND CONTINUITY (Safety Testing) + MILLIOHMMETER ACCESSORIES
- HIPOT 50VA ACCCESSORIES (Safety Testing)
- HIPOT 500VA ACCESSORIES (Safety Testing)
- HIPOT PREMIER SERIES + OTHER UNITS (Safety Testing)
- INSULATION ACCESSORIES (Safety Testing)
-
- CLAMPING DEVICES
- INSULATION TRANSFORMERS
- SAFETY CAGES
-
- HIGH VALUE STANDARD RESISTORS
- LOW VALUE STANDARD RESISTORS
- CALIBRATION KITS
- CALIBRATION KITS FOR XS SERIES
- CALIBRATION KITS FOR DT/DTM/PG VHV SERIES
- DEFAULT SIMULATION BOX (DUMMY BOX)
Harness tester & cable tester (Synor series) probes, trolleys, connectors, cables, ...
- HARNESS TESTER ACCESSORIES
Switching matrix options & accessories
- SWITCHING MATRIX
Very high voltage testers 5DT series, DTM/PG series)
- VERY HIGH VOLTAGE TESTER ACCESORIES
- VERY HIGH VOLTAGE TESTER OPTIONS
- VERY HIGH VOLTAGE TESTER CALIBRATION KITS
INSULATION ACCESSORIES (Safety testing)
| Reference |
Photo |
Equipment |
Description |
| CO19 |
 |
MMG500-M1500P/M-M1501P/M/U |
ground return cable |
| CO58 |
 |
M1500P/M-M1501P/M/U |
cable to connect REM resistor
- 2 cables needed |
| CO90 |
 |
MR45 |
lead for 45V megohmmeter function
|
| CO91 |
|
MR45 |
lead for 500V megohmmeter
function |
| CO93 |
|
MR45 |
lead for 45V & 500V ohmmeter
function |
| SRE24 |
 |
M1500P/M-M1501P/M/U |
guard ring electrode for surface
measurement |
| TE17 |
 |
M1500P/M-M1501P/M/U |
return cable ending with a
probe |
| TE56 |
 |
MMG500 |
high voltage probe |
HIGH VALUE STANDARD RESISTORS
| Reference |
Photo |
Value |
Description |
| REMA0 |
 |
1 MΩ |
High value standard resistor |
| REMA1 |
|
10 MΩ |
High value standard resistor |
| REMA2 |
|
100 MΩ |
High value standard resistor |
| REMA3 |
|
1 GΩ |
High value standard resistor |
| REMA4 |
|
10 GΩ |
High value standard resistor |
| REMA5 |
|
100 GΩ |
High value standard resistor |
| REMA6 |
|
1 TΩ |
High value standard resistor |
| REMA7 |
|
10 TΩ |
High value standard resistor |
| REMA8 |
|
100 TΩ |
High value standard resistor |
HIPOT 50VA ACCESSORIES (Safety Testing)
| Reference |
Photo |
Equipment |
Description |
| CO174 |
|
MG Series |
external box equipped
with standard female socket |
| CO175 |
 |
MG Series |
black ground return
lead ending with banana |
| CO177 |
 |
D/R/SMG50-D/R/SXS50
|
high voltage cable
without probe for fix connexion - 1,80 metre |
| CO192 |
 |
D/R/SMG50-D/R/SXS50
|
external box equipped
with 6 customized female socket |
| CO200 |
 |
D/R/SMG50-D/R/SXS50
|
external box equipped
with shücko female socket |
| CO202 |
|
D/R/SMG50-D/R/SXS50
|
external box equipped
with UK female socket |
| CO204 |
|
D/R/SMG50-D/R/SXS50
|
external box equipped
with Swiss female socket |
| CO206 |
|
D/R/SMG50-D/R/SXS50
|
external box equipped with
Italian female socket |
| CO208 |
|
D/R/SMG50-D/R/SXS50
|
external box equipped with
US female socket |
| CO210 |
 |
D/R/SMG50 - D/R/SMG500-D/R/SXS50-D/R/SXS500
|
return pistol - same as CO175
but with a pistol at the end |
| CO228 |
|
D/R/SMG50-D/R/SXS50
|
external box equipped with
Israeli female socket |
| TE54 |
 |
D/R/SMG50-D/R/SXS50
|
high voltage probe |
| TE58 |
 |
D/R/SMG50-D/R/SXS50
|
high voltage probe with remote
control |
| TE84 |
 |
D/R/SMG50-D/R/SXS50
|
high voltage pistol without
remote control |
| TE86 |
 |
D/R/SMG50-D/R/SXS50
|
high voltage pistol with remote
control |
HIPOT 500VA
ACCESSORIES
| Reference |
Photo |
Equipment |
Description |
| CO175 |
|
MG Series-XS Series |
black ground return
lead ending with banana |
| CO176 |
 |
D/R/SMG500F
- PST500 |
high voltage cable
without probe for fix connexion |
| CO180 |
 |
D/R/SMG500-D/R/SXS500
|
high voltage cable
without probe for fix connexion |
| CO185 |
|
D/R/SMG500
|
external box equipped
with standard female socket |
| CO193 |
 |
D/R/SMG500-D/R/SXS500-
FMG501
|
external box equipped
with 6 customized female socket |
| CO201 |
|
D/R/SMG500-D/R/SXS500
|
external box equipped
with shücko female socket |
| CO203 |
|
D/R/SMG500-D/R/SXS500
|
external box equipped with
UK female socket |
| CO205 |
|
D/R/SMG500-D/R/SXS500
|
external box equipped with
Swiss female socket |
| CO207 |
|
D/R/SMG500-D/R/SXS500
|
iexternal box equipped with
Italian female socket |
| CO209 |
|
D/R/SMG500-D/R/SXS500
|
external box equipped with
US female socket |
| CO229 |
|
D/R/SMG500-D/R/SXS500
|
external box equipped with
Israeli female socket |
| TE20 |
 |
D/R/SMG500F-PST500
|
high voltage pistol |
| TE65 |
 |
D/R/SMG500-D/R/SXS500
|
high voltage probe |
| TE83 |
 |
D/R/SMG500-D/R/SXS500
|
high voltage pistol with remote
control |
HIPOT PREMIER SERIES + OTHER UNITS
| Reference |
Photo |
Equipment |
Description |
| CO120 |
 |
PC7P/M - MPC47P/M |
high voltage cable
without probe for fix connexion |
| CO126 |
 |
PR12PF/M |
high voltage cable
without probe for fix connexion |
| CO215 |
 |
Premier Series
|
external box equipped with schuko female socket |
| CO216 |
|
Premier Series
|
external box equipped
with English female socket |
| CO217 |
|
Premier Series
|
external box equipped
with Swiss female socket |
| CO218 |
|
Premier Series
|
external box equipped
with Italian female socket |
| CO219 |
 |
Premier Series
|
external box equipped with
American female socket |
| CO220 |
|
Premier Series
|
external box equipped with
French female socket |
| CO221 |
 |
Premier Series
|
return high voltage pistol |
| CO230 |
 |
Premier Series
|
external box equipped with
Israeli female socket |
| CO245 |
 |
RMG15AC
|
high voltage cable without
probe for fix connexion |
| CO280 |
 |
Premier Series
|
external box equipped with shuko female socket , especially dedicated for multi-point ground bond testing |
| TE35 |
 |
PC7P/M - MPC47P/M
|
high voltage probe |
| TE49 |
 |
PR12PF/M
|
high voltage probe (2 x TE49s
are necessary) |
| TE75 |
 |
Premier Series
|
high voltage probe |
| TE76 |
 |
Premier Series
|
high voltage cable without
probe for fix connexion |
| TE77 |
 |
Premier Series
|
high voltage pistol without
remote control button |
| TE78 |
 |
Premier Series
|
high voltage pistol with remote
control button |
| TE85 |
 |
PC7P/M - MPC47P/M
|
high voltage pistol with remote
control |
| TE89 |
 |
RMG15AC
|
high voltage probe |
| GOLEAD |
|
Premier Series
|
Ground return lead ending with banana |
| GOLEAD-XX |
|
Premier Series
|
Ground return lead ending with banana |
GROUND
CONTINUITY ACCESSORIES (+ MILLIOHMMETER)
| Reference |
Photo |
Equipment |
Description |
| CO183 |
 |
MGR10 - CMG30
- SMG50/500/500F-SXS50/500
|
2 wire cable ending
with crocodile clip |
| CO183-40-XX |
 |
CXS40 - SXS50/56/500/506 |
2 wire cable ending with crocodile clip |
| CO184 |
 |
MGR10 - CMG30
- SMG50/500/500F-SXS50/500 |
2 wire cable with
retractable tip probe |
| CO259 |
|
Premier 2745A |
2 wire cable with
retractable tip probe |
| CO260 |
|
Premier 2745A |
2 wire cable ending
with crocodile clip |
| TE66 |
 |
CMG30 - MGR10
- SMG50/500/500F-SXS50/500 |
CO183 + CO184 |
| TE80 |
 |
CMG30 |
2 wires probe
with remote control button |
| TE81 |
 |
CMG30 - MGR10
- SMG50/500/500F-SXS50/500 |
2 wires probe
with remote control button + green/red leds |
| TE81-XS-40-XX |
 |
CXS40 - SXS50/56/500/506 |
2 wires probe with remote control button + green/red leds |
| TE82 |
 |
SMG50/500-SXS50/500 |
equivalent as TE81, depending
on options |
| TE91 |
 |
Premier 2745A |
2 wires probe with remote
control button |
MILLIOHMMETER ACCESSORIES + OPTIONS
| Reference |
Photo |
Equipment |
Description |
| CO10 |
 |
RCP2A |
cable ending with
large crocodile clip |
| CO183 |
 |
MGR10 - CMG30
- SMG50/500/500F-SXS50/500 |
2 wire cable ending
with crocodile clip |
| CO184 |
 |
MGR10 - CMG30
- SMG50/500/500F-SXS50/500 |
2 wire cable with
retractable tip probe |
| CO197 |
 |
MGR10 |
big crocodile
clip with max opening dimension 30 mm |
| CO226 |
 |
MGR10 |
big crocodile
clip with max opening dimension 41 mm |
| CO64 |
 |
MGR10 - MO1 |
cable ending with
small sized kelvin clips |
| CO8 |
 |
RCP2A |
cable ending with small sized
kelvin clip |
| CO9 |
 |
RCP2A |
20 meters extension cable
|
| TE28-1 |
 |
RCP2A |
cable with remote control
button on the bipolar tip test probe |
| TE9-1 |
 |
RCP2A |
bipolar tips test probe -
small model |
| TE9-3 |
 |
MO1 |
bipolar tips test probe -
set of two probes |
| CO179A |
 |
RCP2A |
cable for RCP2A PRO |
| CO250 |
 |
RCP2A |
4 wire lead with banana plugs
and tips (VN-VG) |
| CO251 |
 |
RCP2A |
2 wire probe, 4 pins male
plug, concentric tips, length : 150mm |
| CO255 |
 |
RCP2A |
2 wire lead, 3 pins male plug,
Kelvin crocodile clip |
| CO258/CO261 |
 |
RCP2A |
2 wire probe, 4 pins male
plug, concentric tips, length : 180mm |
| CO262 |
 |
RCP2A |
cable for remote control display |
| RCP-01 |
 |
RCP2A |
Remote control display |
| RCP-02 |
 |
RCP2A |
Additional battery pack |
| RCP-03 |
 |
RCP2A |
Additional battery charger |
| RCP-04 |
 |
RCP2A |
12 meters extension cable for remote control display & measurement leads |
| RCP-05 |
 |
RCP2A |
Storage suitcase |
| RCP-06 |
 |
RCP2A |
15 meters extension cable on reel |
| RCP-07 |
 |
RCP2A |
90 meters extension cable on reel |
| RCP-08 |
 |
RCP2A |
RCU / PC adaptor with power supply |
| RCP-09 |
 |
RCP2A |
RCP2PRO software + CO179A PC connection cable |
| RCP-10 |
 |
RCP2A |
20 meters extension cable with male/male plug |
| RCP-11 |
 |
RCP2A |
20 meters extension cable with male/female |
| RCP-14 |
 |
RCP2A |
Adaptation cable from Jaeger 3 pins male connector to 4 pins female connector |
| RCP-15 |
 |
RCP2A |
Protection lid |
| RCP-16 |
 |
RCP2A |
Bag for RCP2A accessories |
| RCP-17 |
 |
RCP2A |
1mOhm Class 0.5% verification shunt resistor |
| RCP-18 |
 |
RCP2A |
5mOhm Class 0.5% verification shunt resistor |
| RCP-19 |
|
RCP2A |
10mOhm Class 0.5% verification shunt resistor |
| RCP-20 |
|
RCP2A |
50mOhm Class 0.5% verification shunt resistor |
LOW VALUE STANDARD RESISTORS
| Reference |
 |
Value |
Description |
| KW-0,001 |
1 mΩ |
Low value standard resistor |
| KW-0,002 |
2 mΩ |
Low value standard resistor |
| KW-0,005 |
5 mΩ |
Low value standard resistor |
| KW-0,01 |
10 mΩ |
Low value standard resistor |
| KW-0,02 |
20 mΩ |
Low value standard resistor |
| KW-0,05 |
50 mΩ |
Low value standard resistor |
| KW-0,1 |
100 mΩ |
Low value standard resistor |
| KW-0,2 |
200 mΩ |
Low value standard resistor |
| KW-0,5 |
500 mΩ |
Low value standard resistor |
| KW-1 |
1 Ω |
Low value standard resistor |
| KW-2 |
2 Ω |
Low value standard resistor |
| KW-5 |
5 Ω |
Low value standard resistor |
| KW-10 |
10 Ω |
Low value standard resistor |
| KW-20 |
20 Ω |
Low value standard resistor |
| KW-50 |
50 Ω |
Low value standard resistor |
| KW-100 |
100 Ω |
Low value standard resistor |
| KW-200 |
200 Ω |
Low value standard resistor |
| KW-500 |
500 Ω |
Low value standard resistor |
| KW-1K |
1 kΩ |
Low value standard resistor |
| KW-2K |
2 kΩ |
Low value standard resistor |
| KW-5K |
5 kΩ |
Low value standard resistor |
| KW-10K |
10 kΩ |
Low value standard resistor |
FOOT SWITCH, LAMP, 19"RACK KIT, 2 HANDS BUTTON
| Reference |
Photo |
Equipment |
Description |
AO10
|
 |
MG Series |
two user hands
occupied with safety user buttons |
AO10-XS
|
 |
XS Series |
two user hands occupied with safety user buttons |
| AO11 |
 |
MG Series-XS Series |
remote control
foot switch |
| AO14 |
 |
MG Series-XS Series |
interconnection
box for more than 2 rem. controlled accessories |
| AO16 |
 |
Premier Series
|
remote control
foot switch |
| AO8 |
 |
PC7P |
remote control
foot switch |
| A0941 |
 |
PST500 |
remote control pedal |
| A0942 |
 |
PST500 |
warning red/green lamp |
| CO222 |
 |
Premier Series
|
warning red/green lamp |
| KRMG3U |
 |
MG Series-XS Series |
19 '' rack mounting adaptation
for 3U height racks |
| KRB3 |
 |
MG Series-XS Series |
19 '' rack mounting adaptation
for 3U height racks |
| KRD3 |
 |
PC7P
|
19 '' rack mounting adaptation
for 3U height racks |
| KRMG4U |
|
MG Series-XS Series
|
19 '' rack mounting adaptation
for 4U height racks |
| KRPREMIER |
 |
Premier Series
|
19 '' rack mounting adaptation
for 4U height racks |
| CO160-CO160xx |
 |
All Equipments
|
warning red/green lamp |
CALIBRATION KITS
| Reference |
Photo |
Equipment |
Description |
MG-91
|
 |
D/R/S50-D/R/SXS50 |
calibration kit for Insulation, Hipot function 50VA |
| MG-91-30A |
 |
CMG30-SMG50/500-SXS50/500 |
Calibration kit for Ground continuity function 30A |
| MG-91-500VA |
 |
D/R/S500-D/R/SXS500 |
Calibration kit for Hipot function 500VA |
| MG-91-LEAK |
 |
FMG500-FMG501 |
Calibration kit for leakage current measurement function |
| MG-91-OHM |
 |
MGR10 Series |
Calibration kit for microhmmeter |
| MG-91-15AC |
 |
RMG15AC |
Calibration kit for 15kVAC hipot function |
| CALPREMIER |
 |
Premier Series |
Calibration kit for Insulation, Hipot function |
| RCP-91 |
 |
RCP2A |
Calibration kit for milliohmmeter |
| DTO5 HV |
 |
MG Series-XS Series |
HV Divider |
| BEM24 |
 |
MG Series-XS Series |
Metal box including 23 standard resistors |
CALIBRATION KITS FOR XS SERIES
SAFETY CAGES
| Reference |
Photo |
Equipment |
Description |
CS1
|
 |
All Equipments |
Security chamber 15 kV 28 dm3 |
| CS3 |
 |
All Equipments |
Security chamber 15 kV |
| CSB-13U |
 |
All Equipments |
Security chamber 35 kV |
| CSB-13-22U |
 |
All Equipments |
Security chamber 35 kV - 22U cabinet version |
| CSB-13-36U |
|
All Equipments |
Security chamber 35 kV - 36U cabinet version |
INSULATION TRANSFORMERS
| Reference |
Equipment |
Description |
MG-43
|
FMG500 & FXS501 |
Single phase external isolation transformer 2 A - 500 VA |
| MG-44 |
FMG500 & FXS501 |
Single phase external isolation transformer 5 A - 1000 VA |
| MG-45 |
FMG500 & FXS501 |
Single phase external isolation transformer 11 A - 2500 VA |
| MG-45-HT |
FMG500 & FXS501 |
Single phase external isolation transformer 11 A - 2500 VA |
| MG-46 |
FMG500 & FXS501 |
Single phase external isolation transformer 16 A - 3500 VA |
| SPE0336132 |
FMG500 & FXS501 |
Single phase external isolation transformer 16 A - 3500 VA |
| MG-65 |
FMG500 & FXS501 |
Single phase external isolation transformer 32 A - 7000 VA |
| MG-62 |
FMG500 & FXS501 |
Three phases external isolation transformer 16 A - 3500 VA |
| MG-63 |
FMG500 & FXS501 |
Three phases external isolation transformer 32 A - 7000 VA |
HARNESS TESTER ACCESSORIES
| Reference |
Photo |
Equipment |
Description |
SYSE0133
|
 |
Synor series Harness Tester |
Touch probe for point searching |
LVIntCable
|
 |
Low Voltage Synor range |
Interconexion cables (in between switching racks) |
HVIntCable
|
|
High Voltage Synor range |
Interconexion cables (in between switching racks) |
| TROLLEY |
|
Synor series Harness Tester |
Trolley with lockable wheel for Synor 4209 |
SYDIN-64
|
|
Synor 4200 series Harness tester |
64 points connector |
SYDIN-32
|
|
Synor 4200 series Harness tester |
32 points connector |
SYINT-2x16-2
|
 |
Synor 4200 series Harness tester |
2 Interface cable 16 wires from 2 x DIN41612 to free end |
SYINT-2x16-5
|
|
Synor 4200 series Harness tester |
2 Interface cable 16 wires from 2 x DIN41612 to free end |
SYINT-2x32-2
|
|
Synor 4200 series Harness tester |
2 Interface cables 32 wires from 2 x DIN41612 to free end |
SYINT-2x32-5
|
|
Synor 4200 series Harness tester |
2 Interface cables 32 wires from 2 x DIN41612 to free end |
SYINT-2x64-2
|
|
Synor 4200 series Harness tester |
2 Interface cables 64 wires from 2 x DIN41612 to free end |
SYINT-2x64-5
|
|
Synor 4200 series Harness tester |
2 Interface cables 64 wires from 2 x DIN41612 to free end |
CLAMPING DEVICES
| Reference |
Photo |
Equipment |
Description |
|
 |
MGR10 |
1 Meter clamping devices from 0,1 mm² up to 100 mm²
|
| FS |
|
MGR10 |
Guide rail for MK1 |
|
 |
MGR10 |
1 Meter clamping devices from 1 mm² up to 1000 mm² |
|
|
MGR10 |
1 Meter clamping devices from 1 mm² up to 2500 mm² |
|
 |
MGR10 |
Half Meter clamping devices from 16 µm up to 280 µm |
|
 |
MGR10 |
1 Meter clamping devices from 1 mm² up to 1 500 mm² |
DEFAULT SIMULATION BOX (DUMMY BOX)
| Reference |
Photo |
Equipment |
Description |
| SD50 |
 |
CMG30, RMG50, DMG50, SMG50
|
Dummy box for ground continuity, hipot (50 VA) and insulation |
| SD500 |
 |
RMG500, DMG500, SMG500 |
Dummy box for ground continuity, hipot (500 VA) and insulation |
| SD1000 |
 |
SMG50 or 500+FMG501, FMG500 |
Dummy box for hipot (15 kV AC / 65 mA short circuit current) |
SWITCHING MATRIX OPTION & ACCESSORIES
| Reference |
Photo |
Equipment |
Description |
| CO277 |
 |
EXS3200-HV, EXS3200-HV-HC |
High voltage cable for 500VA units |
| CO278 |
|
EXS3200-HV, EXS3200-HV-HC |
High voltage cable for 50VA units |
| CO297-XX |
|
EXS3200-HC, EXS3200-HV-HC |
High current cable |
| CO298 |
 |
EXS3200-HC, EXS3200-HV-HC |
4 wiresJaeger/Jaeger cable |
| CO306 |
 |
EXS3200-HC, EXS3200-HV-HC |
2 wires Jaeger/Jaeger cable |
| CO307 |
 |
EXS3200-HC, EXS3200-HV-HC |
2 wires Jaeger/4 x 4mm banana plugs cable |
| CO308 |
 |
EXS3200-HC, EXS3200-HV-HC |
4 wires Jaeger/4 x 4mm banana plugs cable |
| KRXS |
 |
EXS3200-HC, EXS3200-HV, EXS3200-HV-HC |
19 '' rack mounting adaptation for 3 U |
| MOD-HV4 |
 |
EXS3200-HV, EXS3200-HV-HC |
5000 VAC / 7000 VDC switching card - 4 points |
| MOD-HC4 |
 |
EXS3200-HC, EXS3200-HV-HC |
40 A switching card - 4 points |
| EXS3200-01 |
 |
EXS3200-HC, EXS3200-HV, EXS3200-HV-HC |
Channels direct control through external dry contacts |
| EXS3200-09-HV |
 |
EXS3200-HV |
Disconnectable
rear panel inputs |
| EXS3200-09-HC |
 |
EXS3200-HC |
Disconnectable rear panel inputs |
| EXS3200-09 |
|
EXS3200-HV-HC |
Disconnectable rear panel inputs |
| EXS3200-003-00 |
 |
EXS3200-HV-HC |
Insulated HV power current channel module |
DT/DTMG/DTPG series Very High Voltage ACCESSORIES
| Reference |
Photo |
Equipment |
Description |
| 0V |
|
DTPG/DTMG Series
DT-M/P Series
|
HV return wire (potential earth) black wire 6mm2 |
| BAU |
|
DTPG/DTMG Series
DT-M/P Series |
Emergency stop box with connector and cable < 20m |
| BNC-I |
|
DTPG/DTMG Series
DT-M/P Series |
Current output . current ratio: approx. 5V at ratted current |
| BNC-U |
|
DTPG/DTMG Series
DT-M/P Series |
Voltage output through HV divider |
| BPO |
|
DTPG/DTMG Series
DT-M/P Series |
"Operator" button in serial with the safety loop |
| BPO2 |
|
DTPG Series
DT-M/P Series |
2 buttons box "Operator" to be connected in serial with the safety loop |
| BUZ |
|
DTPG/DTMG Series
DT-M/P Series |
Buzzer : coded signal for Start/Passed/Failed |
| CHV |
|
DTPG/DTMG Series
DT-M/P Series |
Transformer to DUT unshielded high voltage cable for aerial connection (for voltages < 110 kVAC) |
| CL |
|
DTPG Series
DT-M/P Series |
Green/red light column |
| CLM |
|
DTPG Series
DT-M/P Series |
Green/red light column |
| CLV |
|
DTPG/DTMG Series
DT-M/P Series |
Transformer to DUT shielded high voltage cable |
| CRO |
|
DTPG/DTMG Series
DT-M/P Series |
30mm crocodile clamp mounted on the output cable ending |
| GYRO |
|
DTPG/DTMG Series
DT-M/P Series |
Rotative warning lamp fixed on the control unit |
| GYROM |
|
DT-M/P Series |
Rotative warning lamp with magnetic support and cable <20m with connector |
| KW |
|
DTPG Series
DT-M/P Series |
Wheels for 19 inches control unit cabinet |
| SW125 |
|
DTPG Series
DT-M/P Series |
Wheels for 19 inches control unit cabinet or rough floor |
| SW150 |
|
DTPG Series
DT-M/P Series |
Wheels for 19 inches control unit cabinet or rough floor |
| TW1 |
|
DTPG/DTMG Series
DT-M/P Series |
Wheels for transformer, provided with dedicated screws, but not mounted for shipment. Diameter 75 mm for transformer < 100 kg |
| TW3 |
|
DTPG Series
DT-M/P Series |
Wheels for transformer, provided with dedicated screws, but not mounted for shipment. Diameter 125 mm for transformer < 300 kg |
| TW5 |
|
DTPG Series
DT-M/P Series |
Wheels for transformer, provided with dedicated screws, but not mounted for shipment. Diameter 125 mm for transformer < 500 kg |
| TW10 |
|
DTPG Series
DT-M/P Series |
Wheels for transformer, provided with dedicated screws, but not mounted for shipment. Diameter 150 mm for transformer < 1000 kg |
| OIL BATH 250 |
|
DTPG/DTMG Series
DT-M/P Series |
Glass bath for test in oil |
| ELECTRODE 50/60 |
|
DTPG/DTMG Series
DT-M/P Series |
2 electrodes |
| CO160+CO160-DTPG |
|
DTPG/DTMG Series |
Red-green lamp to indicate the high voltage presence |
| AO11+AO11-DTPG |
|
DTPG/DTMG Series |
Remote control foot switch |
DT/DTMG/DTPG series Very High Voltage OPTIONS
| Reference |
Photo |
Equipment |
Description |
| DTMG-01 |
|
DTPG/DTMG Series
|
RS232 interface (listener-talker) |
| MG-02 |
|
DTPG/DTMG Series |
PLC interface |
| MG-06 |
|
DTPG/DTMG Series |
IEEE488-2 / GPIB interface |
| MG-96-DTMG |
|
DTPG/DTMG Series |
software |
| DISRES |
|
DTPG/DTMG Series |
Discharge resistor |
| KD |
|
DTPG/DTMG Series |
External grounding relay |
| DR20** |
|
DTPG/DTMG Series |
Rectifier 22kV peak 1kOhm |
| DR30** |
|
DTPG/DTMG Series |
Rectifier 30kV peak 2kOhm |
| DR45** |
|
DTPG/DTMG Series |
Rectifier 45kV peak 3kOhm |
| DR70** |
|
DTPG/DTMG Series |
Rectifier 70kV peak |
| DR100** |
|
DT-P/M Series |
Rectifier 100kV |
| DR142** |
|
DT-P/M Series |
Rectifier 142kV |
| DR280** |
|
DT-P/M Series |
Rectifier 283kV |
| 2F |
|
DT-P/DT-M Series |
2 calibration ranges for 50 and 60Hz |
| 60HZ |
|
DT-P/DT-M Series |
Mains in 60Hz for generation in 60 Hz |
| BR |
|
DT-P/DT-M Series |
Burning option made at 9 x In during an adjustable time from 0.2s up to 1s |
| BRP |
|
DT-P/DT-M Series |
Burning option : Permanent burning limited at nominal current and < 1A |
| BW50 |
|
DT-P/DT-M Series |
Cabinet on wheels 75mm instead of a table housing |
| PW50 |
|
DT-P/DT-M Series |
Pult desk on wheels 75mm instead of a table housing |
| E/SANA |
|
DT-P Series |
Analog input/outpus 0-10V |
| E/STOR |
|
DT-P Series |
Contact inputs: Start/Stop |
| CNT |
|
DT-P/DT-M Series |
Ground continuity test to insure the ground connexion is made properly |
| GNG |
|
DT-P Series |
Go/NoGo outputs: +24Vdc 500mA for test result information Passed or Failed |
| PI |
|
DT-P Series |
RS232 interface |
| SOFT |
|
DT-P Series |
TestLab software for control, visualization and records |
| V6 |
|
DT-P Series |
Replacement of standard variac speed of 24 seconds to reach 110% of full scale by a variac with a speed of 6 seconds, regulation 3% |
| V12 |
|
DT-P Series |
Replacement of standard variac speed of 24 seconds to reach 110% of full scale by a variac with a speed of 12 seconds, regulation 2% |
| IR |
|
DT-M Series |
Adjustable current threshold from 0 to 100% |
DT/DTMG/DTPG series Very High Voltage CALIBRATION KITS
| Reference |
Photo |
Equipment |
Description |
| DIV-75KV-AC |
|
DTPG/DTMG Series
DT-P/DT-M Series
|
75 kVAC max HV divider |
| DCOPT |
|
DTPG/DTMG Series
DT-P/DT-M Series |
DC extension for the DIV-75kV-AC divider |
| DIVCHORD |
|
DTPG/DTMG Series
DT-P/DT-M Series |
HV anti corona connection cable for divider |
Cable testing combined with electrical safety testing and measuring instruments is our added value. As a producer of those 3 product families, Sefelec is the unique, worldwide, to have this cable tester global solution.
|
